Optimum Opti-Seal Paint Sealant

Optimum Opti-Seal Paint Sealant

Get outstanding gloss, slickness, and durable protection in minutes with Optimum Opti-Seal. This highly concentrated polymer sealant requires only a few drops per vehicle, with one ounce providing enough product to protect approximately 4–5 vehicles.

Opti-Seal can be used on both uncoated vehicles and ceramic-coated vehicles. On bare paint, it works as a durable stand-alone paint sealant. On ceramic-coated vehicles, it adds slickness, gloss, and an additional layer of surface protection while remaining fully compatible with the underlying coating.

Fast, Easy Protection

Opti-Seal eliminates the traditional apply, haze, and buff process associated with conventional paint sealants. Simply apply a very small amount, spread it evenly across the surface, and allow it to flash.

No residue. No buffing. Just apply and walk away.

Highly Concentrated Polymer Protection

Opti-Seal begins cross-linking as soon as it is applied, creating a crystal-clear polymer barrier over the surface. This protective layer helps shield your vehicle from:

• Dirt and road grime
• Moisture
• Oils and environmental contamination
• UV exposure

The result is a slick, glossy finish with months of durable protection.

Safe for Ceramic-Coated Vehicles

Already have a ceramic coating? Opti-Seal can be applied directly over ceramic-coated paint to enhance surface slickness and gloss while adding sacrificial protection to the coating.

It can also be used on uncoated vehicles as the primary paint protection after washing, decontamination, or polishing.

Use Opti-Seal On

• Paint
• Ceramic coatings
• Plastic trim
• Wheels
• Glass
• Leather
• Vinyl
• Fabric and carpet

Not recommended for rubber surfaces.

No Cleaners, Fillers, or Abrasives

Opti-Seal is a true sealant and contains no cleaners, fillers, or polishing abrasives. If the paint has oxidation, swirls, or other defects, correct the surface before applying Opti-Seal.

Once the surface is clean and properly prepared, apply Opti-Seal as your final protective step.

For additional gloss and protection, Opti-Seal can also be topped with Optimum Car Wax.

Why Choose Optimum Opti-Seal?

• Compatible with uncoated and ceramic-coated vehicles
• Provides months of polymer protection
• Enhances gloss and slickness
• Extremely concentrated — approximately 4–5 vehicles per ounce
• No buffing required
• Leaves no powder or residue
• Works on multiple exterior and interior surfaces
• Fast, simple application

Professional-level protection has never been easier.

Directions for Use

1. Start with a clean, dry surface.
2. Apply a small amount. Lightly mist Opti-Seal onto a clean, dry sponge applicator, or spray it directly onto the vehicle surface.
3. Spread evenly. Work Opti-Seal into the paint using circular motions or back-and-forth passes until the product is evenly distributed.
4. No buffing required. Opti-Seal leaves no residue that needs to be removed or buffed.
5. Watch for streaking. If streaking occurs, too much product has been applied. Simply remove the excess with a clean microfiber towel.
6. Clean the applicator. After use, wash the applicator pad with soap and water and allow it to dry completely before reusing.

Use as a Drying Aid

Opti-Seal can also be used as a drying aid. After washing, spray it directly onto wet exterior surfaces, then dry the vehicle. This allows you to dry and seal the surface at the same time.