Optimum Polymer Technologies
Optimum Hyper Shine Ceramic Coating
Optimum Hyper Shine Ceramic Coating
FREE Shipping Over $49
Pickup available at 5768 Distribution Drive
Usually ready in 24 hours
Optimum Hyper Shine DIY Ceramic Coating
Optimum Hyper Shine is Optimum's new premium level consumer DIY ceramic coating. It may be the easiest to apply ceramic coating ever created. It offers protection levels, gloss levels and performance rivaling the very best Si02 professional ceramic coatings.
You don't have to worry about high spots or flash time when installing Hyper Shine. Optimum Hyper Shine can be applied to the surfaces and be left to crosslink for up to 15 minutes before wiping off without fear of high spots or streaks. It should be left on the surface for at least 5 minutes before wiping off providing for a relaxed stress free installation. It is as easy and enjoyable as applying wax.
Hyper Shine fills light swirls and scratches. This means polishing and buffing the paint is optional. For the best finish and maximum longevity the paint can be polished but Hyper Shine gives great results and long term protection without polishing.
Benefits of Optimum Hyper Shine
- Easy Application
- No High Spots
- Up to 3 Years of Protection
- Incredible Shine and Slickness
- Fills & Hides Light Swirls and Scratches
- Install With or Without Polishing or Paint Correction
- Enhanced Water Beading
- Protects Paint, Glass, Lights, Plastic Trim, Wheels
Optimum Hyper Shine™ is sold in 15cc syringes for 150sf of coverage. This is more than enough product to protect even the largest passenger cars, trucks, and SUVs with product to spare.
Directions
1. Wash vehicle with Optimum Touchless Decon Wash, following the Decontamination Wash Instructions on the bottle. Dry vehicle.
2. OPTIONAL: For best finish & maximum coating longevity, polish paint with Optimum Hyper Polish, Optimum Waffle pad and Optimum dual action polisher.
3. Thoroughly wipe vehicle surfaces with Optimum Paint Prep and allow to dry.
4. Prime applicator pad within 50-60 drops of Hyper Shine, after applying to the first panel, add 10-15 drops for subsequent panels.
5. Apply Hyper Shine to paint, plastic trim, lights, & wheel faces in overlapping circular motions using supplied applicator. Not recommended for glass.
6. Allow minimum of 5 and no more than 15 minutes for coating to crosslink. Lightly level any visible high spots with an Optimum Pearl Weave Microfiber Towel. Hyper Shine has a long working time. It can be applied to multiple panels before leveling without risk of high spots.
7. If vehicle will be exposed to weather within 12 hours, wait 60 minutes after installation then protect with Optimum Opti-Seal or Opti-Coat Hyper Seal. Allow 7 days before exposing to chemicals or any abrasion.
